Technical Specifications
Features
-
High-torque permanent magnet synchronous motor delivering high power. The motor is efficiently matched to the hydraulic system for fast response.
-
It uses SDLG’s exclusive electronic control system, which connects all electrical components for real-time communication and control, monitors the machine’s operating status and safety, and manages and optimizes power distribution to extend run time.
-
It offers high power, stable output, high working efficiency, low vibration and noise, long service life, fast charging and a maintenance-free battery.
-
The 423 kWh battery system (12 units) allows 1.5 hours of charging for 6–10 hours of operation.
-
The motor and hydraulic oil use an intelligent ATS cooling system with customizable reverse blowing and dust removal, which automatically controls fan speed based on hydraulic oil and water temperature during normal operation, saving energy and increasing efficiency.
-
Standard 32 t H-series ROPS cab that protects the operator and offers a spacious interior.
Technical Specifications
| Rated voltage (V) | 618 |
| Rated battery capacity (kWh) | 423 |
| Rated power (kW) | 150 (204 hp) |
| Average run time (h) | 6–10 |
| Charging time (h) | 1.5 |
| Pump capacity (L/min) | 2×230 + 18 (2×60.8 + 4.8 gal/min) |
| Main relief valve setting (bar) | 340 (4,930 psi) / 355 (5,148 psi) |
| Max. bucket digging force (kN) | 147.1 (33,069 lbf) |
| Max. arm digging force (kN) | 105.3 (23,672 lbf) |
| Travel speed, low (km/h) | 3.5 (2.2 mi/h) |
| Travel speed, high (km/h) | 5.7 (3.5 mi/h) |
| Gradeability (°) | 35 |
| Swing speed (r/min) | 12.1 |
| Ground pressure (kPa) | 35.1 (5.1 psi) |
| Boom length (mm) | 5,700 (18′ 8.4″) |
| Arm length (mm) | 2,900 (9′ 6.2″) |
| Bucket capacity (m³) | 1.25 (1.64) |
| Transport dimensions (L × W × H, mm) | 9,720 × 2,990 × 2,940 |
| A – Max. digging reach (mm) | 9,940 (32′ 7.3″) |
| B – Max. digging reach at ground level (mm) | 9,750 (31′ 11.9″) |
| C – Max. cutting height (mm) | 9,450 (31′) |
| D – Max. dumping height (mm) | 6,650 (21′ 9.8″) |
| E – Max. digging depth (mm) | 6,730 (22′ 1″) |
| F – Max. digging depth (8 ft level) (mm) | 6,510 (21′ 4.3″) |
| G – Max. vertical wall digging depth (mm) | 5,830 (19′ 1.5″) |
| I – Tail swing radius (mm) | 2,970 (9′ 9″) |
| J – Min. front swing radius (mm) | 3,650 (11′ 11.7″) |
| K – Undercarriage length (mm) | 4,460 (14′ 7.6″) |
| M – Track shoe width (mm) | 600 (23.6″) |
